Hochwertige Holz-Pellet-Kaminofen, Billige Holz Pellet-Kaminofen, Holz-Pelletofen für Industrie Lieferanten in China

Home > Produkt-Liste > Heizung Herd-Ausrüstung > Holz und Kohle brennt Herd > Cheap and easy direct fired wood stove for dryer machine

Cheap and easy direct fired wood stove for dryer machine

Basisinformation

Modell: HJ-Series

Produktbeschreibung

Specifications

wood stove
1.High efficiency
2.Environmental proyection
3.High performance
4.Professional manufacturer

Cheap and easy direct fired wood stove for dryer machine

 

 

 

Introduction of direct fired wood stove

 

Direct-fired wood stove is made up of combustion chamber, settling chamber and mixing air chamber. Fuel is put into the combustion chamber manually. Under the effect of air blower, the fuel burns fiercely and produces high-temperature smoke with dust, which enters into the settling chamber to remove dust. Certain amount of cold air can mix with the hot air from the clean room, so hot smoke of different temperature can be offered. It can offer heat source for various kinds of drying systems.

 

 

 

 

Advantage of direct fired wood stove

 

1) the coal types of wide adaptability;
2) high combustion efficiency, thermal efficiency > 95%, if the quantity of heating fuel consumption such as the table;
3) output stable heat load, mechanical combustion, simple operation, adjustment is very convenient;
4) environmental protection standards, no secondary pollution, the operating environment is clean;
5) hot air spotlessness, dustiness 30 ~ 120 mg/Nm3;
6) convenient adjustment, hot air temperature below 1000 °C, + / - 5 °C continuous heating wind temperature stability;
7) equipment strong durability, low operating cost, simple maintenance.

 

 

 

 

Range of application:

 

Cleaning: detergent, the 4 a zeolite, the layered sodium silicate, detergent additives, etc


Ceramic: ceramic powder, glaze, clay, kaolin, etc


Fertilizer: compound fertilizer, monoammonium phosphate, diammonium phosphate, potassium chloride, magnesium sulfate, potassium sulfate, etc


Chemical categories: quartz sand, alumina, polyaluminium chloride, chemical additives, water purifier, ferric sulfate, etc


Building materials: ceramic fiber, insulation board, heat preservation cotton, ultrafine powder, gypsum, quartz sand, etc


Environmental protection: the sludge drying, papermaking black liquor and pharmaceutical waste liquid treatment, lignin, etc


The other: coal, wood drying, lees, food, feed, acetylene cylinder, rubber, silicone, paper plastic mould, dyes, etc

 

 

 

 

Parameters of direct fired wood stove

 

Model

Heat Supply (kcal/h)

Burning Area (Length*Width)

Heating efficiency

Coal Consumption (standard coal)

HJ-20

20*104

0.6*0.7m2

≥90%

30 kg/h

HJ-40

40*104

0.8*1.0 m2

≥90%

50 kg/h

HJ-60

60*104

0.8*1.2 m2

≥92%

70 kg/h

HJ-100

100*104

1.0*1.4 m2

≥92%

100 kg/h

HJ-150

150*104

1.0*1.8 m2

≥92%

150 kg/h

HJ-200

200*104

1.2*2.0 m2

≥92%

300 kg/h

HJ-250

250*104

1.2*2.2 m2

≥92%

400 kg/h

Remarks

Besides the above models, we can also supply special model as your request.

 

 


 Certification of Zhengzhou Hengjia Michinery

 

 

 

 

 

 

Why Choose Us

 

1. We are Factory (Not Dealer)

All machineries from Zhengzhou Hengjia Machinery Manufactory are made by ourselves, with lower price, good quality and assured full after service. So please buy machine from our factory.

 

2. Training & Service

Pre-sale services: enthusiasm

We provide you with the prophase plan, process flow design and manufacture equipment according to your special demand.


Sale services: servant

Send technicians to the jobsite for guiding the installation and adjustment, training operators and finishing the check and accept together with you.

 

After-sale services: faithfulness

To establish long term friendship, we will regularly pay return visit to customers.

 

In addition, we provide one-year warrantee to make sure your machine runs consistently. We always keep certain inventory level of spare parts, which means the replacements can be shipped to you right away.

 

3. If you are new for this business, we will help you

Many thanks for your trust; we can provide you with design scheme for complete production lines, spot inspection and operator training according to your demands and the conditions of applied spot, we can help you choose the right equipments. 

 

4. We’d like to recommend a suitable type for you and send you a best quotation. Some questions please inform us in your enquiry.

 

♥ What is the heating source you use?

 

♥ How many kilograms water need to evaporated?

 

 

Welcome to our factory!


 

 

Produktgruppe : Heizung Herd-Ausrüstung > Holz und Kohle brennt Herd

Premium Related Products